COOCHAS Mobile

Porsche 911 (997)

Flat Tire - Sealant Use

Mobile Main Page

Sealing the tire with the tire repair kit is only an emergency repair. Even with the tire airtight, it may be used only for short journeys in an emergency. The maximum permitted speed is 50 mph (80 km/h).

The tire sealant can be used to seal small cuts, especially in the tire tread.

The tire sealant and a compressor with pressure tester can be found in the luggage compartment.

Download PDF (44k)

  • A - Filler bottle
  • B - Filler hose
  • C - Plug of the filler hose
  • D - Valve turner
  • E - Valve insert
  • F - Tire valve

tiresealant

1.Leave the object that caused the puncture in the tire.

2.Shake filler bottle A

3.Screw filler hose B onto the filler bottle. The filler bottle is now open.

4.Unscrew valve cap from tire valve F.

5.Remove valve insert E from the tire valve with valve turner D. Keep the valve insert in a clean and dry place.

6.Remove plug C of the filler hose B.

7.Push filler hose onto the tire valve.

8.Hold filler bottle higher than the level of the tire valve and press it together forcefully until the bottle is completely emptied into the tire.

9.Pull filler hose off the tire valve.

10.Twist the valve insert firmly into the tire valve using the valve turner.

11.Connect the compressor to the cigarette lighter and inflate the tire to the prescribed tire pressure.

12.Screw valve cap onto the tire valve.

13.Check the tire pressure after driving for around 10 minutes. If the tire pressure is less than 22 psi (1.5 bar), do not continue driving. If a value of more than 22 psi (1.5 bar) is indicated, correct the pressure to the prescribed value.

Mobile Main Page